What a motorcycle flag pole mount actually does
A motorcycle flag pole mount carries a flag on the bike instead of on your back. On group rides, charity runs and parade laps it keeps both hands on the bars and stops a pole from pressing against your jacket. Some mounts, like the one in this guide, also take an action camera, so one fitting point does two jobs.
It is not a frame part and it is not a safety device. Treat it as a travel accessory: something you fit for an event, check before you ride, and remove when you do not need it.
What the 3-in-1 mount includes
The 3-in-1 Motorcycle Flag Pole & Action Camera Mount is 129 USD and comes in two versions, one for DJI action cameras and one for Insta360. Both versions share the same pole and flag hardware.
- Flag mount for on-bike use. The pole is clamped to the bike, so the clamp and hardware need checking after installation.
- Action camera adapter. Choose DJI or Insta360 when you order; the adapter is specific to the camera family.
- Trekking-pole adapter. The same pole can be used off the bike, so it is not a single-purpose part.
- All-metal construction. There is no plastic joint to age in the sun.
One point the listing states plainly: this is an aftermarket accessory, not a safety-certified device. That does not make it flimsy, but it does mean you are responsible for checking the mounting point and the hardware.
Fitting starts with the mounting point, not the pole
Most failed flag mounts are not pole failures. They are mounting-point failures: a clamp pinching a thin plastic panel, or a bolt tightened into a thread that was never designed to carry a side load.
Before ordering, look at the bike and answer three questions.
- Is there a load-bearing point? Prefer a point the manufacturer already uses for luggage or a pillion grab rail over drilled bodywork.
- Does the clamp match the tube or bracket? Diameter and shape matter more than the brand name on the box.
- Will the pole clear the bike? Check clearance to the rear tyre, exhaust, indicator and pillion leg with the suspension compressed.
The listing notes that extra hardware may be needed and that fitment varies by bike and mounting position. That is honest rather than vague: no single clamp fits every motorcycle.
Flag or camera: choose the adapter before you order
The DJI and Insta360 versions exist because the mounting interfaces differ. Pick the camera you actually ride with. If you are between cameras, the adapter is the decision, not the pole.
For filming, a pole-mounted camera gives a high, stable viewpoint that is different from a helmet or handlebar mount. It also picks up more vibration the further it sits from the bike's centre, so keep the pole short when you are filming and save the full height for the flag.
Setting it up in five steps
- Assemble the pole and adapter on the bench, not on the bike.
- Fit the clamp to the chosen mounting point and tighten it evenly, a little at a time.
- Attach the flag or camera, then check clearance with the suspension compressed.
- Check every bolt after the first ride; vibration loosens what hand-tightening missed.
- Re-check before each event, and remove the pole for track days or long high-speed runs.
Riding with a flag: what to watch
A flag adds side area, and side area adds load. At walking pace in a group that is harmless. At highway speed it is not: the pole flexes, the clamp takes a cyclic load, and the flag can whip towards the rider behind you.
- Keep the pole short and the flag small for road use.
- Do not carry a flag on a track day.
- Check local rules on flag size, position and lighting before an event.
- Ask the organiser what they require; some events specify a maximum height.
Care and storage
Rinse the pole after a wet or salty ride and dry the clamp before storage. Check the threads and the clamp faces for wear each time you fit it. Store the pole collapsed with the adapter removed so the joint does not seize. Avoid overtightening: a crushed tube is not repairable.
FAQ
Will this mount fit my motorcycle?
Only if the clamp matches your mounting point. The product page says fitment depends on the bike and the position, so measure the tube or bracket you plan to use and confirm with the store before ordering.
Can I use a GoPro with it?
The listing offers DJI and Insta360 adapters. A GoPro uses a different interface and is not listed for this product.
How tall is the pole, and how large a flag can it take?
The listing does not publish a pole length or a maximum flag size. We will not invent either number; ask before you order if that decides it for you.
Is riding with a flag legal?
It depends where you ride. Check your local vehicle rules and the event organiser's requirements before fitting a flag for road use.
Price, variants and where to buy
The mount is 129 USD in both versions: DJI Action Camera and Insta360 Action Camera. Both are listed as available on the product page. Other accessories sit in the motorcycle accessories collection.
Related product: 3-in-1 Motorcycle Flag Pole & Action Camera Mount, 129 USD, DJI or Insta360 adapter, product page.
