Updated November 2026. Two screens for the 450SR, and the difference is not height.The Racing Modified Windshield is a racing-look screen. The V3 Front Windshield is and is a front assembly: colour-matched panels plus a tinted screen.

In short:
- Racing: screen only, three tints, listed for the 450SR.
- V3: panels plus screen, 15 combinations, listed for the 450SR and SR-S.
- One V3 combination (Matte Black + Black) is closing the gap to.
What each one is?
| Racing Modified | V3 Front | |
|---|---|---|
| Price | See the product card | (one combo ) |
| What you get | a screen | panels plus screen, colour-matched |
| Tint options | Light Gray, Dark Gray, Black | five body colours x three tints |
| Listed fitment | CFMOTO 450SR | CFMOTO 450SR and 450SR-S |
On the CF 450SR, if your fairing is already the colour you want, the Racing screen is the cheaper answer. If the front of the bike is the thing you are changing, the V3 does more, because it changes the panels as well. The full platform context is in the 450SS vs 450SR guide.
One pricing detail: fourteen of the V3's fifteen combinations are. The Matte Black body with the Black tint is which narrows the gap to the Racing screen to for that combination only.
What should you know about one fitment difference that matters?
The V3 listing states it fits the CF 450SR and the 450SR-S. The Racing screen listing states the 450SR only. If your bike is an SR-S, read the fitment line before ordering the cheaper screen, and confirm against the live listing.
Which actually helps with wind?
On the CF 450SR, both are shaped to move the edge of the airstream, and neither comes with a measured number. What matters is where the top edge sits relative to your helmet, which depends on your height and how you sit.
A taller edge moves pressure off your chest and can put turbulent air at helmet level, which makes noise worse rather than better. If noise is the complaint, changing the screen is a guess; if pressure on your chest is the complaint, a taller screen is the right direction.

What should you know about installation?
On the CF 450SR, bolt-on at the stock screen points, no drilling. Two things to check before you tighten: the gauge sightline, and whether the nose sits flush around the headlight opening. The V3 involves removing and refitting the front panels as well, so allow time for alignment rather than forcing edges.
If a hole does not line up, stop and check you have the right variant rather than opening it out.
How do you care for the CFMOTO windshield?
On the CF 450SR, both are high-strength acrylic per the listings. Acrylic dislikes solvent: mild soap, plenty of water, a soft cloth, and never a dry wipe over road grit — the cleaning guide covers the routine. Re-check the fasteners after the first ride and again after a heat cycle or heavy rain.

What should you know about common questions?
On the CF 450SR, these are the usual questions. Will the V3 fit a 450SR-S? And the Racing screen? Can I fit the V3 panels without the screen? Do the side flares on the V3 replace a winglet?
Will the V3 fit a 450SR-S?
Yes, per its listing: 450SR and 450SR-S.
And the Racing screen?
Its listing states the 450SR. If you ride an SR-S, confirm fitment before ordering.
Can I fit the V3 panels without the screen?
They are sold as one assembly. Check the listing for whether parts are separable.
Do the side flares on the V3 replace a winglet?
No. They belong to that front assembly and are not a substitute for the Concept or V4 winglet — the winglet comparison covers the choice.
Racing Modified Windshield / V3 Front Windshield. All 450SR parts: 450SR / 450SS.