Updated November 2026. Two winglets for the 450SR: Concept and V4. Not better and worse versions of one part. Different shapes, different finishes.

In short:
- Concept,: six accent finishes in Diagonal or Forged patterns.
- V4,: four solid colours, a larger blade closer to the fairing edge.
- Neither makes a performance claim; both are appearance parts with a clearance check.
| Concept | V4 | |
|---|---|---|
| Price | See the product card | See the product card |
| Looks like | the concept-edition winglet | a larger blade at the front/side-panel edge |
| Colours | Red Diagonal, Red Forged, Blue Diagonal, Blue Forged, White Diagonal, White Forged | Starlight Black, Matte Black, Starlight White, Silver |
| Best for | repeating a colour accent | a factory-plus look |
Both bolt on without modifications and both list the 450SR. The US bike is the 450SS, same platform.
What is the finish question decides for many buyers?
On the CF 450SR, the Concept's six options are built around accent colours: diagonal and forged patterns in red, blue and white. If your bike has a colour accent you want to repeat, the Concept range is the one that can match it — the finish options are on the Concept Winglet product page.
The V4 stays in neutral territory: Starlight Black, Matte Black, Starlight White, Silver. Easier to live with on an unmodified bike, and harder to make look deliberate.
What they do, per the listings?
On the CF 450SR, both listings state the same thing: a race-style aero look at the panel edge, not a measured downforce or lap-time claim. That is the honest description. What is real is the visual effect. The 450SR side panel is a large flat area and a blade at its edge breaks it up.

Which version should you buy?
On the CF 450SR, take the Concept if you want colour, subtlety and the lower price. Take the V4 if you want the shape to be obvious from ten metres. Practical point: the V4's larger blade sits closer to the fairing edge, so check clearance carefully after fitting.
What is the failure mode nobody warns you about?
On the CF 450SR, a winglet that touches the fairing rubs through the paint behind it within a few hundred miles, and that mark sits at a panel edge where it cannot be polished out. Fit it, slide a strip of paper along the mating edge, then tighten.
If the paper will not pass, adjust before riding. The full sequence is in the fitting and alignment guide.

What should you know about combines with?
On the CF 450SR, either winglet works with either screen, and neither replaces the side flares that come with the V3 front assembly. If you are changing the front bodywork too, decide that first — the 450SR windshield and winglet guide covers how the two choices interact.
What are the common questions about 450SR winglet?
On the CF 450SR, these are the usual questions. Which winglet is better? Do they fit the 450SS? Do they fit the 675SR-R? Can I fit both winglets? Do they need drilling?
Which winglet is better?
Neither. Buys six graphic finishes on a smaller blade; buys four solid colours on a larger one.
Do they fit the 450SS?
Yes. Same platform, different market name.
Do they fit the 675SR-R?
No. The 675SR-R has its own winglets and listed separately.
Can I fit both winglets?
They mount at different points, but they are designed as alternatives. Most riders choose one.
Do they need drilling?
No. Both mount to standard points; the clearance check is the part people skip.
Concept Winglet / V4 Winglet. All 450SR parts: 450SR / 450SS.