Updated September 2026. The CFMOTO 675SR-R Side Panel is a replacement side bodywork piece for the CF 675SR. It is meant to refresh the look of the bike after a drop, track-day scuff, or long-distance stone-chip wear. Because it is listed for this platform, fitment is intended to be straightforward on the CF 675SR. Whether it is fully bolt-on depends on whether it uses the stock fairing stay and body-clip holes; check the product page for the exact left/right option and fastener contents.
Does this CFMOTO 675SR-R Side Panel fit the CF 675SR?
This side panel is intended for the CF 675SR only. It is not a universal piece and will not fit the CF 450SR or ZX-500RR. Check the product page for left/right and color options, since side panels are usually side- and finish-specific.
Is the CFMOTO 675SR-R Side Panel bolt-on on the CF 675SR?
On the CF 675SR, this is an OEM-style replacement. It should attach to the stock fairing stays and body-clip locations if the mounting holes line up. Most owners can swap it at home with basic hand tools. Confirm fastener contents on the product page.
How do you choose this part vs staying stock for the CF 675SR?
On the CF 675SR, treat this panel as a cosmetic replacement or styling refresh, not a performance upgrade. Choose it after a tip-over, low-side, or stone-chip wear, or when building a matched bodywork set. If the stock panel is undamaged, there is no functional reason to replace it.
| Dimension | Notes |
|---|---|
| Platform | CF 675SR only. Not for CF 450SR / ZX-500RR. |
| Part | CFMOTO 675SR-R Side Panel — replacement side bodywork. |
| Install | OEM-style bolt-on to stock fairing stays if holes align; verify left/right and fastener contents on the product page. |
| Use | Street, commuting, touring refresh, or track-day cosmetic repair. |
| Pairs with | |
| Shop | https://isleparts.com/products/cfmoto-675sr-r-side-panel |
What is this CFMOTO 675SR-R Side Panel like on the highway or a track day?
On the CF 675SR, the panel does not change wind noise or riding position. It simply closes off the side of the bike for a cleaner look. At a track day it adds no performance benefit, but fresh bodywork makes a repaired bike look consistent.
How do you care for the CFMOTO 675SR-R Side Panel on the CF 675SR?
On the CF 675SR, wash the panel with bike-safe soap, rinse grime and bugs, and dry with a soft microfiber. Inspect mounting tabs and grommets after hard rides. A light wax or motorcycle-safe protectant helps painted finishes last; store the bike out of direct sun when possible.
CFMOTO 675SR-R Side Panel FAQ for the CF 675SR
Does this panel replace a broken stock panel?
Yes, that is the main purpose. It is a replacement piece, not a stick-on cover, so you will remove the damaged factory panel and install this one in its place. Keep any reusable metal inserts or rubber grommets from the old panel if the new one does not include them.
Is this sold as a pair or per side?
The product page will list whether the price is per panel or a left/right pair. Side panels are almost always side-specific, so double-check the option before ordering. If you only damaged one side, you only need to order that side to match the remaining stock panel.
Can I run this panel with the stock lower fairing?
Yes. It is designed to work with the factory bodywork and should line up with the lower fairing edge on the CF 675SR. If you also want a matched aftermarket look, the same-bike Lower Chin Fairing is the natural companion.
Do I need to paint it?
If the product page lists the panel in a factory color, it should arrive ready to install. If it is listed as unpainted or primer finish, you will need a matching paint job before it goes on the bike. Always confirm the finish on the live product page.
Will installing this panel void my warranty?
Cosmetic bodywork replacement generally does not void the motorcycle warranty, but any damage caused by improper installation is not covered. Use correct fasteners, do not force clips, and follow the service manual if you are unsure.
Should I install it myself or take it to a dealer?
If you are comfortable removing the seat, side panels, and lower fairing on your CF 675SR, this is a reasonable home job. A dealer is a safer choice if the panel is part of a larger crash repair or if mounting tabs on the fairing stay are bent.
Can I use this panel on a CF 450SR or ZX-500RR?
No. This SKU is listed for the CF 675SR platform only. The mounting points, panel shape, and side profile are different on other platforms, so do not expect it to fit.
What tools are needed?
Typical needs are a metric socket or hex-key set, a small Phillips screwdriver, and panel-pop tools for plastic clips. Exact sizes vary, so check the fasteners on your bike before starting.
Shop the CFMOTO 675SR-R Side Panel for the CF 675SR at https://isleparts.com/products/cfmoto-675sr-r-side-panel.
