Updated November 2026. A winglet costs on a 675SR-R and on an S1000RR. Twenty times the price for a part that does the same job, and the difference is material and model, not effectiveness.

| Bike | Winglet | Where to check the price |
|---|---|---|
| CFMOTO 675SR-R | Racing winglet | See the product card |
| CFMOTO 675SR-R | V4 side winglet | See the product card |
| CFMOTO 450SR | Concept winglet | See the product card |
| CFMOTO 450SR | V4 winglet | See the product card |
| ZXMOTO 820RR | Racing winglet | See the product card |
| BMW S1000RR | 2023-style carbon winglets | See the product card |
A part listed for one bike in this guide does not fit the others.
Why is the BMW twenty times the price?
It is 3K dry carbon fibre, moulded from the original part, for a premium litre bike. The 675SR-R and 450SR winglets are not stated as carbon on their listings, and the 820RR one describes itself as a styling accessory in four finishes.
That is the whole explanation. It is not that the BMW part works twenty times better; it is that it is made from a different material for a different market. The standard-shape 2019–2024 S1000RR wingletsSit just above it which is where the range actually tops out.
What none of them claim?
Measured downforce. The CFMOTO listings state a race-style aero look explicitly, not a downforce or lap-time claim, and the 820RR listing calls the winglet a styling detail. The BMW part is primarily intended for track riding per its listing.
The change is visual, and it is real: a fin at the side-panel edge changes how the nose reads.

What should you know about one BMW-specific warning?
The 2023-style carbon winglets have sharp edges. The listing says to wear gloves when handling and installing. That is unusual for bodywork and worth knowing before the box arrives.
Which risk scales with price?
A winglet is the most exposed part on the side of the bike at walking pace. A part that catches a garage door is an annoyance; a carbon part that does the same is a bad week.
How do you choose?
Cheapest entry:The 675SR-R racing winglet four finishes including a carbon-look hydro dip. Most obvious change:The 450SR V4 or 820RR racing winglet. Matching a carbon build: the BMW part, if the rest of the bike is already dry carbon.
What is the one check before fitting?

Clearance. An edge that touches the panel behind it will rub through the paint in a few hundred miles, at the edge of a panel where it cannot be polished out. Slide a strip of paper along the mating edge before tightening — the full sequence is in the alignment guide.
Details by platform: 675SR-R vs, 450SR Concept vs V4. Collections: 675SR-R, 450SR, S1000RR.