Updated November 2026. Short answer: a panel that arrives back damaged is a return that gets refused, whatever the original fault was. Pack it the way it arrived: double-wall box, the panel floated off every face, corners protected, hardware bagged separately, and photographs taken before the box is closed.
Why this matters more than it sounds?
A return is judged on the condition it arrives in. If a panel comes back with a cracked corner or a scuffed face, the carrier's damage and the original defect become one argument, and the default outcome is a refused return.
Five minutes of packing protects the whole claim.
Most carriers also exclude damage from packaging they consider inadequate, which is a judgement made after the fact. The practical rule is simple: if you can feel the panel through the box, it is not packed.
What you need?
A double-wall box, ideally the one the part arrived in. Bubble wrap or closed-cell foam sheet, at least two layers over the face. Corner protectors, or foam blocks taped over each corner. Packing tape, not masking tape. A zip bag for fasteners, clips and brackets.
- Paper and a marker for the return reference.
What should you know about step by step?
Photograph before you pack. Both faces, all edges, all corners, the part number or label, and the fastener holes. This is the evidence that the panel was intact when it left you. Clean and dry it. Grit in bubble wrap acts like sandpaper over a long trip.
- Wrap the face, not just the edges. Two layers of bubble over the visible surface, taped so it does not shift.
- Protect the corners separately. Corners fail first. Foam blocks taped on are better than extra bubble everywhere.
- Bag the hardware. Fasteners and clips in a zip bag, taped to the outside of the bubble so they cannot rattle against the panel.
- Float the panel in the box. At least 5 cm of packing on every side, and it should not move when you shake the closed box.
- Label it. Return reference, order number and "fragile, plastic bodywork" on two faces.
What should you know about if it is a painted or carbon-look panel?
Finished panels are the ones that show transit damage. A gloss black or carbon-look surface scuffs if anything hard touches it, even under bubble wrap. Put a sheet of soft paper against the finish first, then bubble. Do not use newspaper: the ink transfers onto light colours and it looks like a defect.
The 820RR seat cowlIs a good example of a part that is easy to pack badly. It is it comes in Red, Black, White and Carbon Fiber Style, and it is a curved shell with a thin edge along the seat line. That edge needs foam, not just bubble.
What should you know about windshields travel separately?
Do not pack a screen loose in the same box as a panel. Screens crack from point loads, and a panel corner resting against a screen will do exactly that. If you are returning both, use two boxes or fit a rigid divider and pack each item independently.
The arrival inspection checklist is the mirror image of this process and worth reading before you open the next delivery.
What should you know about return paperwork that does not get rejected?
- Return authorisation or reference inside the box, not only on the label.
- Photographs of the fault, taken before packing, in focus and in daylight.
- A short written description of the fault, with the date it was noticed.
- The original packaging if you still have it. Reusing it removes any argument about inadequate packing.
Cross-border returns add customs paperwork to this list. Our guide to shipping, duties and returns covers what to declare on a return so it is not treated as a new import.
What should you know about common mistakes?
Single-wall box. It folds under a stacked parcel and the panel takes the load. Bubble only on the edges. The face is what gets pressed against the box wall. Loose fasteners. They work through bubble and mark the finish.
- Tape directly on the panel. It lifts finish on matte and carbon-look surfaces.
- No photographs. Without them, you cannot separate a transit crack from the original fault.
| Dimension | Notes |
|---|---|
| Platform | Not a single-bike fitment note. Confirm the platform on the product page. |
| Part | packing fairing panel return shipping |
| Install | Not a single-part install note. Follow the sections above. |
| Use | Care, fit, or buying judgment. Not a fitment claim for one bike. |
| Shop | https://isleparts.com/collections |
What are the common questions?
Can I return a panel in a bin bag? Should I remove the fasteners? What if I no longer have the original box? Does the same apply to a winglet or a small cover?
Can I return a panel in a bin bag?
No. Flexible packaging gives no protection and carriers will treat the damage as inadequate packing.
Should I remove the fasteners?
Yes, bag them separately. Fitted hardware presses into the panel in transit and can crack a fastener hole.
What if I no longer have the original box?
Buy a double-wall box slightly larger than the panel and pack to the same standard. The size is less important than the clearance on every face.
Does the same apply to a winglet or a small cover?
Yes, with less packing. Small parts still crack at mounting holes if they are allowed to move. Bag the hardware and give them their own box rather than dropping them into a larger parcel.
The rest of the range, including single panels, is in the accessories collection.