Updated November 2026. For the pair, and the panel that decides whether a carbon tail reads from the side or only from behind. Tail side panels sit between the cheap seat cowl and the expensive tail panels, and they do the most for a side-on photograph.

In short:
- For the pair, 3K dry carbon, moulded from the original parts.
- Visible from the side and in three-quarter shots, unlike the upper tail panels.
- The natural second purchase after a seat cowl.
What they cover?
On the BMW S1000RR, the flanks of the tail unit, below the seat line. On an S1000RR those surfaces are large, flat and painted, which is exactly why carbon there changes the read of the bike so much. With a seat cowl fitted, these panels complete the rear: the cowl changes the top line, the side panels change the flanks.
Where they sit in the range?
| Part | Where to check the price |
|---|---|
| Seat cowl | See the product card |
| Seat cowl upper tail panel | See the product card |
| Tail side panels (pair) | See the product card |
| Upper tail panel | See the product card |
| Lower tail panel | See the product card |
Why they cost?
On the BMW S1000RR, two curved mouldings with mounting points, in dry carbon. Price tracks tooling and surface area, and a pair of tail panels is more complex than the single cowl above them.

Should you buy them?
On the BMW S1000RR, if the rear is already carbon at the top: yes, they finish the job. If you are starting at the rear:The seat cowl first, then these. If you photograph the bike from the side: these beat the upper panels for visible impact.
How do you install the tail side panels?
Listed for the 2019–2024 BMW S1000RR. Confirm the year. Aftermarket, not genuine BMW. Fit after the cowl, with adjacent panels loose so edges can be aligned. No torque values published; use your manual.
What do these parts not change?
On the BMW S1000RR, they do not add structure, they do not protect in a fall, and they do not change the seat or the passenger arrangement. They are bodywork: shape and material.

What are the common questions about tail side panels?
On the BMW S1000RR, these are the usual questions. Are they sold as a pair? Do they fit with a pillion seat? Do they need painting? Are they genuine BMW parts? What completes the rear after these?
Are they sold as a pair?
Yes, left and right.
Do they fit with a pillion seat?
They cover the flanks, not the seat area; check the listing photos for the year.
Do they need painting?
No, they ship in the carbon finish.
Are they genuine BMW parts?
No, aftermarket, as the listing states.
What completes the rear after these?
The lower tail panel if you are going all the way.
Browse: BMW S1000RR carbon collection. Tail options compared: seat cowl, M-style and upper panels.