Updated November 2026. Take the mirrors off and you leave two holes in the fairing. On the ZONTES 703RR, those holes are what the mirror block-off plates cover. The part is simple; the decision is not, because there are two versions and one regulatory question behind them.
In short:
- Plain plates: three finishes, no wiring.
- LED plates: same finishes, concealed turn signals built in.
- Removing mirrors is regulated in many places. Check before assuming a concealed signal satisfies it.
What does the plates actually?
On the ZONTES 703RR, they bolt over the mirror mounting points once the mirrors are removed. That is the whole function: close the hole, finish the surface, stop the fairing looking like something is missing. The side effect is the one people buy them for.
With the mirrors gone, the front of the bike is narrower and the cockpit reads as a race bike rather than a road bike.

What does the plain version change?
On the ZONTES 703RR, aluminium alloy, listed in Black, Titanium Colour and Silver. No wiring, no connectors, no switch. If your indicators are not mounted on the mirrors, or the bike is track-only, this is the straightforward choice. Fit them dry first.
The plates sit on a curved surface, and the fastener should pull them down evenly rather than drag them across the paint.
What does the LED version change?
On the ZONTES 703RR, the LED version carries a concealed turn signal inside the plate, in the same three finishes. It exists because removing a mirror often means removing the indicator that lived on it. The listing describes the LED brightness as approximately equivalent to a 10 to 21 W incandescent bulb.
That is a brightness comparison, not the LED's power draw, and it is not a claim about homologation.

Which one should you buy?
On the ZONTES 703RR, plain if your front indicators live elsewhere, or the bike never sees the road. LED if removing the mirrors would otherwise leave you with no front indicators, and a concealed signal is acceptable where you ride. Neither if your jurisdiction requires mirrors and you are not fitting an alternative.
How do you install the mirror block-off plates?
Listed for the ZONTES 703RR. Not the 703R. Aftermarket parts, not official ZONTES components. No torque figure is published, so none is quoted here. Use the manual value for the original mirror fasteners. On the LED version, test the indicators before final tightening.
What they cost, delivered?
On the ZONTES 703RR, plain, with LED, free shipping. US delivery is listed at 7 to 15 business days after dispatch, with import duties paid by the buyer.
| Dimension | Notes |
|---|---|
| Platform | ZONTES 703RR |
| Part | mirror block-off plates |
| Install | No torque figures in this guide. Use the service manual and confirm the year on the product page. |
| Use | Track-day look. Street use is called out where the part is a poor daily choice. |
| Shop | https://isleparts.com/products/zontes-703rr-mirror-block-off-plates |
What are the common questions about ZONTES 703RR mirror block-off?
On the ZONTES 703RR, these are the usual questions. Do I lose the mirrors permanently? Are the LED versions plug and play? Will they fit a 703R? Are they metal or plastic?
Do I lose the mirrors permanently?
No. The plates cover the mounting points; the mirrors can go back on if you keep the hardware.
Are the LED versions plug and play?
The listing describes concealed LED turn signals, not a connector type. Check the connector on your bike against the photos.
Will they fit a 703R?
No. Listed for the 703RR only.
Are they metal or plastic?
Aluminium alloy, with the LED version also using polycarbonate.
Product page: ZONTES 703RR Mirror Block-Off Plates. Add the tall windshield or see the full collection.