Updated November 2026. A tank pad and a tank cover are named after the same part of the bike and do completely different jobs.Confusing them is how riders order a sticker and expect a shell.

In short:
- Pad: a strip of protection at the filler or front edge.
- Cover: a shell that changes the tank's surface and protects all of it.
- They do not stack — a pad under a cover stops the cover seating flat.
What is the two products?
| Tank pad | Tank cover | |
|---|---|---|
| What it is | a small stick-on protector at the filler or front | a moulded shell over the tank |
| What it protects | one stripe of paint from zip, buckle and jacket | the whole tank surface from chips, scuffs and sun — while fitted |
| What it changes visually | almost nothing | the largest single surface on the bike |
| Price band here | Not stocked — typically –40 elsewhere | Priced on the cards on CFMOTO, ZXMOTO and ZONTES; in carbon on the S1000RR |
| Reversible | yes, though adhesive can mark aged paint | yes — original paint survives underneath |
Which your tank needs?
On the BMW S1000RR, chips at the front of the tank, from debris: neither fixes that — a cover prevents future chips, the paint stays under it. A pad does nothing for the front edge. Zip and buckle scratches near the filler: a pad's job, and a pad is the cheaper tool.
- You want the bike's colour to change: only a cover does that. The 500RR's five colours, the 675SR-R's four finishes and the S1000RR's carbon are colour products, not protection products — though they protect too.
- The tank already has a dent: neither. Fix the dent first; a pad shows nothing, a cover sits proud.
Why they do not stack?
On the BMW S1000RR, a pad under a cover shows through as a shadow line and can prevent the cover seating flat. Every cover fitting guide in this shop starts the same way: remove tank pads and bag rings before fitting. Cover on, pad off — or pad on, cover off.
Not both.

What is the middle ground we do sell?
On the BMW S1000RR, the 820RR fuel cap grip padIs the closest thing in this shop to a pad's job: it protects and grips one specific spot, at the filler, and it is designed to sit under nothing.
What are the common questions about tank pad vs cover?
On the BMW S1000RR, these are the usual questions. Does the shop sell tank pads? Does a cover fit over a bag ring? Will a cover damage the paint under it? Which is better for resale? Can a cover hide existing scratches?
Does the shop sell tank pads?
No. We sell covers — the closest thing here to a pad's job is the 820RR's fuel cap grip pad, which protects and grips one specific spot.
Does a cover fit over a bag ring?
Check the listing, and test the ring against the cover — most do not coexist cleanly.
Will a cover damage the paint under it?
Not when fitted over a clean, dry tank. Grit trapped underneath is what marks paint — hence the clean-first rule.
Which is better for resale?
The cover, used with the original tank untouched under it: reversibility plus a protected tank.
Can a cover hide existing scratches?
Yes, it covers them — but that is concealment, not repair. If the tank is deeply scuffed, know what you are covering.
Collections: 675SR-R · ZXMOTO 500RR · S1000RR carbon.