Updated November 2026. Most screen damage is caused by cleaning, not by road use. A dry wipe over grit, or the wrong product, will dull acrylic in one pass and there is no way to polish it back evenly.
What is the method?
Soak first. Lay a wet cloth over the screen for a minute so grit lifts rather than being dragged. Plenty of water, a little mild soap. Car shampoo without wax is fine. Washing-up liquid removes oils but strips any coating, so use it sparingly.
- Wipe in one direction with a soft microfibre. Circular motion over grit grinds it in.
- Rinse with clean water, then pat dry. Do not rub dry with a towel.
What not to use?
Petrol, brake cleaner, acetone, alcohol gels. They attack acrylic and polycarbonate and leave a cloudy patch that cannot be fixed. Paper towels. They are abrasive enough to leave fine scratches on plastic. Car wax. It leaves a haze on clear plastic and collects in the edges.
- A dry cloth over a dusty screen. This is the single most common cause of swirl marks.
What should you know about bugs and tar?
Soften them with a wet cloth and time, not with a scraper. Fingernails and plastic scrapers both leave marks on a screen that was previously clear.
What does the scratches change?
Light surface marks can sometimes be reduced with a plastic-specific polish, worked evenly across the whole screen. Deep scratches cannot be removed, and local polishing leaves a visible dip that distorts your view. If a scratch sits in your sightline, replacement is usually the better answer than polishing.
A distorted view through a screen at speed is a safety issue, not a cosmetic one.
What should you know about two habits that prevent most damage?
Rinse the screen before you touch it, and keep a microfibre in the bike for exactly this purpose rather than using whatever is available at a petrol station.
When the screen is off the bike?
Store it flat or on its natural curve, away from heat. Acrylic that sits loaded in a warm garage takes a set, and a screen that has deformed will not seat evenly again.
What should you know about screens referenced in this guide?
- Yamaha XMAX 300 Front Windshield
- CFMOTO 450SR Racing Modified Windshield
- ZXMOTO 820RR Windshield — PC polycarbonate: the solvent list above is stricter for it than for acrylic
Screens by platform: XMAX 300, 450SR, 675SR-R, 500RR.
Yamaha XMAX 300 Front Windshield
Front windshield for the Yamaha XMAX 300. Listed in 4 style options.
From $99.00
CFMOTO 450SR Racing Modified Windshield
Racing modified windshield for the CFMOTO 450SR. Listed in Clear, Smoke Gray and Black.
$199.00
Windshield for the ZXMOTO 820RR. Listed in Black and Gray; Ridged or Rounded.
$199.00
| Dimension | Notes |
|---|---|
| Platform | Not a single-bike fitment note. Confirm the platform on the product page. |
| Part | This guide |
| Install | Not a single-part install note. Follow the sections above. |
| Use | Care, fit, or buying judgment. Not a fitment claim for one bike. |
| Shop | https://isleparts.com/products/yamaha-xmax-front-windshield |


