Updated November 2026. Four small carbon parts, to and they are the ones that decide whether a build looks finished or looks started. None of them is large. All of them are visible in places people actually look.

In short:
- Wiring harness cover and front sprocket cover: each.
- Instrument panel trim:.
- Exhaust hanger: the only one with a structural job.
What should you know about instrument panel trim,?
On the BMW S1000RR, it surrounds the dash. You look at it every single ride, which makes it the highest-use carbon part on the bike per dollar. It is also the one nobody photographs and everybody notices when it is carbon and the rest of the cockpit is not.
If you ride with a tank bag, check clearance before ordering: trim sits exactly where a bag strap wants to pass.
What should you know about front sprocket cover,?
On the BMW S1000RR, it covers the front sprocket area, where chain lube and grit collect. Plastic here goes chalky and stained; carbon at least looks deliberate while it gets dirty.

Practical note: this is a part you remove at chain service, so it needs to come off and go back on cleanly. Check the mounting after the first refit.
What should you know about wiring harness cover,?
On the BMW S1000RR, a small cover over the harness routing near the frame. Almost invisible in normal use, entirely visible with the fairing off. Buy it when you are already in there.
What should you know about exhaust hanger,?
On the BMW S1000RR, the only structural part in this group. It holds the canister in position, so it takes load and heat. That matters: a hanger is not decoration, and if it fails the exhaust moves.
Carbon is a reasonable material here, stiff and light, but check that it clears your exhaust routing, particularly if the system is not standard.
Where they sit in the range?
| Part | Where to check the price | Seen |
|---|---|---|
| Wiring harness cover | See the product card | only with panels off |
| Front sprocket cover | See the product card | low, side |
| Instrument panel trim | See the product card | every ride |
| Exhaust hanger | See the product card | rear, side |
Why small parts cost this much?

On the BMW S1000RR, tooling, not size. Each of these is a specific shape for one bike, made in dry carbon, with mounting points that have to be right. The mould for a cover costs the same whether the part is large or small.
Should you buy them?
On the BMW S1000RR, if the cockpit is already carbon: yes, the instrument trim completes it. If you are doing chain and sprocket work: the sprocket cover is a natural add. If this is your first carbon part:No. Start with something visible from three metres, a front fender or heel guards.
What is the four parts, linked?
On the BMW S1000RR, wiring Harness Cover Front Sprocket Cover Instrument Panel Trim Exhaust Hanger
How do you install this part?
Listed for the 2019–2024 BMW S1000RR. Confirm the year. Aftermarket, not genuine BMW. No torque values published; use your manual, especially on the exhaust hanger. Check clearances after fitting: harness routing, chain run, and exhaust movement.
What are the common questions about small parts?
On the BMW S1000RR, these are the usual questions. Which is the best value? Is the exhaust hanger safe in carbon? Do they need painting? Are they genuine BMW parts? Can I fit the sprocket cover with chain fitted?
Which is the best value?
The instrument panel trim, because you see it every ride.
Is the exhaust hanger safe in carbon?
It is sold for the purpose and takes load by design. Check clearance and use the manual torque values.
Do they need painting?
No, they ship in the carbon finish.
Are they genuine BMW parts?
No, aftermarket, as each listing states.
Can I fit the sprocket cover with chain fitted?
Yes, it is an outer cover. Check the chain run after refitting.
Instrument trim: S1000RR Instrument Panel Trim. Exhaust hanger: S1000RR Exhaust Hanger. Full range: BMW S1000RR carbon collection.