Updated November 2026. The ZXMOTO 820RR one-piece front fairing is and comes in nine variants: three base colours, each with three second-element options. That is enough choice to stall a decision, especially when you are buying from a photo.

In short:
- Nine combinations at one price: Red, Gloss Black or White base, each with Gray, Black or Clear.
- Choose the base colour first — it is what the bike reads as from ten metres.
- Is the fairing alone; the screen and fixings are separate.
This guide breaks the nine combinations down, explains how to choose in the right order, and covers what to check before you commit to a colourway.
What are the nine combinations?
| Base colour | Options |
|---|---|
| Red | Red / Gray, Red / Black, Red / Clear |
| Gloss Black | Gloss Black / Gray, Gloss Black / Black, Gloss Black / Clear |
| White | White / Gray, White / Black, White / Clear |
On the ZXMOTO 820RR, all nine are. The base colour is the main body of the fairing; the second element in the name is the paired part of the combination. If it matters to you exactly which piece the second element covers, ask before ordering rather than assuming from the label.
How do you choose the base colour first?
On the ZXMOTO 820RR, start with the colour you want people to see from ten metres away. That is the base: Red, Gloss Black or White. Everything else is a detail that reads at close range.
- Red is the loudest option and the one that most obviously reads as a race livery on this bike.
- Gloss Black disappears into the bike. It is the choice for riders who want the shape to do the talking without adding a colour.
- White shows the panel lines best and photographs well, but it also shows dirt and chips sooner than the other two.
What should you know about then pick the second element?
On the ZXMOTO 820RR, gray, Black or Clear is a smaller decision, but it changes how the front end sits with the rest of the bike.
- Gray softens the contrast. It is the safest match if your bike has silver or grey details elsewhere.
- Black adds contrast and ties in with black screens, black trim and dark hardware.
- Clear keeps the front lighter and is the closest to a screen-led look.

If you are also changing the 820RR windshield, decide the two together. A Clear second element with a Black screen is a different bike from a Black second element with a Gray screen — and the windshield comes in Ridged or Rounded on top of that, so the front end is a three-decision purchase, not one.
What buys?
On the ZXMOTO 820RR, this is a one-piece front fairing, which means fewer joints than a multi-panel front. Fewer joints means fewer gaps to line up and fewer places for a buzz to develop. It also means the panel has to be right first time: a one-piece part does not let you adjust one section independently.
The price is for the fairing. Fixings, screens and trim are separate. If you are building the front from scratch, budget for the screen and any fasteners you need alongside it.
What is the 820RR front end, priced as a set?
| Part | Where to check the price |
|---|---|
| One-piece front fairing | See the product card |
| Windshield | See the product card |
| Racing winglet | See the product card |
On the ZXMOTO 820RR, those three are the complete nose: at listed prices. Add the seat cowl and the front-and-rear look is settled. The full nine-part range is — see the820RR build order for the sequencing.
What should you check before you order?
Confirm the bike: this is for the ZXMOTO 820RR, not the 500RR or a CFMOTO model — the two ZXMOTO platforms share nothing, as the 500RR vs 820RR comparison explains. Check your current front end and note any damage at the mounting points.
- A one-piece fairing over bent mounts will not sit cleanly.
- Decide the base colour against the bike as it will look, not as it looks now. If a tail change is coming, factor that in.
- Photograph your bike's front in daylight and compare it with the product images side by side.
How do you install the front fairing?
On the ZXMOTO 820RR, a one-piece front fairing is easier to align than a set but less forgiving of mistakes.
- Remove the screen and mirrors first, and any trim that overlaps the fairing edge.
- Dry-fit the whole panel and check the gap at the headlight area and at both side edges before fastening anything.
- Start every fastener by hand. One-piece panels can be pulled out of shape by tightening one side first.
- Snug evenly and stop. Use your service literature for torque values where they exist.
- Recheck the edges after the first ride; a new panel often settles once it has been heat-cycled.
What should you know about colour and finish expectations?
On the ZXMOTO 820RR, painted panels vary slightly between batches, and they read differently in sunlight and in a garage. If you are matching a new fairing to panels you already own, do not expect a perfect match from a different production run. If exact colour continuity matters, plan the panels you care about as one order.
What should you know about shop the 820RR front fairing?
See the ZXMOTO 820RR one-piece front fairing and the 820RR windshield, read the guide to 820RR race fairings, or browse the full ZXMOTO 820RR parts range.
What are the common questions?
On the ZXMOTO 820RR, these are the usual questions. Is every colour combination the same price? Which combination is most popular? Can I order a single side instead of the one-piece front? Does the fairing come with a screen? Does it fit the 820R naked?
Is every colour combination the same price?
Yes. All nine variants are.
Which combination is most popular?
We do not publish sales rankings, so treat any claim about popularity with suspicion. Pick the combination that matches your bike.
Can I order a single side instead of the one-piece front?
The one-piece front is one part. If you only need a side panel, look at the other bodywork in the 820RR range.
Does the fairing come with a screen?
No. The screen is a separate part in Ridged or Rounded, Black or Gray.
Does it fit the 820R naked?
No. The 820RR parts are listed for the 2026 820RR; the naked bike is a different front end.