Updated November 2026. The ZXMOTO 820RR One-Piece Front Fairing is a bodywork part that replaces the separate nose panels with a single integrated front piece. It is the biggest visual change you can make to an 820RR without paint, and because it is one piece, fitment is about alignment rather than panel-to-panel gaps. This guide covers what the part is, which bikes it fits, and the install order that avoids cracking a fresh panel.
ZXMOTO 820RR One-Piece Front Fairing
One-piece front fairing for the ZXMOTO 820RR. Listed in 9 style options.
$499.00
What does a one-piece front fairing change?
On the ZXMOTO 820RR, on a faired bike the nose is usually several panels: an upper, two side cheeks, and trim that ties them together. A one-piece front fairing integrates that area into a single moulding. Two consequences follow.
- Fewer seams. The front reads as one surface, which is what makes the part look deliberate rather than bolted on.
- One alignment job instead of four. You set the whole nose against the frame and the screen instead of chasing gaps between separate panels.
It is a styling part. The listing makes no aero claim, and none is made here — if you want aero, the 820RR winglet and windshield are the parts to look at.
What does the product change?
On the ZXMOTO 820RR, the listing carries eight variants at the same price, built from three base colours and three trims:
| Base | Trim options |
|---|---|
| Red | Gray / Black / Clear |
| Gloss Black | Gray / Black / Clear |
| White | Gray / Black / Clear |
How do you read the colour names?
The first word is the main body colour; the second is the trim or screen area. Red / Clear and Gloss Black / Clear are the two combinations that show the most contrast against the bike's own panels. Gloss Black / Black is the most subdued and hides stone chips best.
What does the fitment change?
The ZXMOTO 820RR is also written as ZX 820RR or Zhang Xue 820RR. Two cautions apply, both taken from the live listings:
- This is not the 820R naked — different bodywork, different mounting.
- 820RR-R fitment is not confirmed. If you own the RR-R variant, check with us before ordering.
The 820RR is a new platform in this catalogue, and bodywork is the part where model-year differences bite first. Send a photo of your current nose if you are unsure which variant you have.

What should you know about install order and alignment?
On the ZXMOTO 820RR, a one-piece nose is heavier and less forgiving than a single side panel. Support it while you work, and do not let it hang from one fastener.
- Remove the screen first so the nose can move without levering against it.
- Unbolt the stock front panels and keep the fasteners grouped by location.
- Offer the new fairing up with all fasteners finger-tight — locate every hole before tightening any of them.
- Align the nose to the tank cover line and the side panels, then tighten gradually in a cross pattern.
- Refit the screen last and check the gap is even on both sides.
How do you check the windshield interface?
The screen mounts to the fairing, so a nose that sits a few millimetres off will show up as a twisted screen. Fit the screen with the fairing still slightly loose, check the gap by eye from the front and from the side, then tighten. If the screen has to be forced, the fairing is not seated.
What should you know about fasteners and torque?
Torque values are not published in this article. Use the figures in the 820RR service manual for bodywork fasteners, and re-check them after the first ride. Over-tightening a plastic panel is how cracks start at the bolt hole.
How do you pair it with the 820RR windshield?
If the nose is coming off anyway, the ZXMOTO 820RR Windshield is the natural companion. It is polycarbonate rather than acrylic, described as impact-resistant and stable from −40 °C to °C, and it comes in four options: Black or Gray, each in Ridged or Rounded profile.
Two practical notes. First, compare the hole pattern with your stock screen before mounting — the listing says to do exactly that. Second, choose the profile for the look you want: Ridged adds a harder top edge, Rounded keeps the factory silhouette.

Windshield for the ZXMOTO 820RR. Listed in Black and Gray; Ridged or Rounded.
$199.00
What should you know about finish care, shipping and returns?
On the ZXMOTO 820RR, wash the fairing with mild soap and a soft cloth, and keep solvents away from the painted surface. Check the fasteners after the first few rides; a new panel seats itself as it heat-cycles.
Shipping is free from the partner production base in China, with US delivery quoted at 7–15 business days after dispatch and import duties paid by the buyer. Uninstalled parts can be returned — installed, painted or modified parts cannot. Dry-fit the fairing before you commit to it.
Which listed parts does this guide cover?
- ZXMOTO 820RR One-Piece Front Fairing — eight colour combinationsproduct page
- ZXMOTO 820RR Windshield — Black or Gray, Ridged or Roundedproduct page
On the ZXMOTO 820RR, both were checked against the live catalogue on 9 November 2026: names, prices, variants and fitment statements match the store listings. See the ZXMOTO 820RR parts collection for the rest of the platform, and read the fairing removal guide before you start pulling panels.
What does the FAQ change?
On the ZXMOTO 820RR, these are the usual questions. Does it fit the 820R naked? Will it fit an 820RR-R? Is the fairing painted or raw plastic? Do I need the windshield too? How long does install take? Is this an OEM part?
Does it fit the 820R naked?
No. The 820R has different bodywork and different mounting points. This part is for the 820RR.
Will it fit an 820RR-R?
Not confirmed. The listing does not claim 820RR-R fitment, so ask before ordering.
Is the fairing painted or raw plastic?
It is supplied in the colour combination you select — red, gloss black or white with a gray, black or clear trim. It is not a paint-yourself panel.
Do I need the windshield too?
No. Your stock screen can be reused if the hole pattern matches. The windshield is an optional pairing, not a requirement.
How long does install take?
Allow an afternoon for a first fit. The time goes into alignment, not into turning bolts.
Is this an OEM part?
No. It is an aftermarket accessory, described as such on the listing, and it is not an official manufacturer part.

