Updated November 2026. Nine parts, to and three obvious gaps. The 675SR-R range is deeper than the 450SR's, but it is not complete — and knowing what is missing stops you ordering the wrong thing twice.

In short:
- Nine parts exist: two winglets, chin fairing, split screen, two side panels, seat cowl, tank cover, triple clamp.
- No tail section panels, no frame or swingarm covers, no exhaust hanger.
- The front and middle are buildable; the structural covers are not.
What exists, by price?
| Part | Where to check the price |
|---|---|
| Lower chin fairing | See the product card |
| Racing winglet | See the product card |
| V4 side winglet | See the product card |
| Shark fin side panel | See the product card |
| Side panel | See the product card |
| Split racing windshield | See the product card |
| Seat cowl | See the product card |
| Racing tank cover | See the product card |
| Top triple clamp + clip-ons | See the product card |
What is the three gaps?
On the CF 675SR-R, tail section. There is a seat cowl but no tail side panels and no rear tail panel. If a 675SR-R goes down at the back, the visible tail bodywork is not something we can currently supply. Frame and swingarm covers. Nothing in the range.
On a bike often bought as a track-day platform, that is the gap that shows most — the ZX-10R and S1000RR both have those pairs, this platform does not.
Exhaust hanger. No listing. If your system needs a bracket, it is not here.

Where does the gaps sit against other platforms?
| Part group | 675SR-R | ZX-10R | S1000RR |
|---|---|---|---|
| Front and nose | yes | yes | yes |
| Side panels | yes | yes | yes |
| Tail panels | seat cowl only | yes | yes |
| Frame and swingarm covers | no | yes | yes |
| Exhaust hanger | no | See the product card | yes |
The pattern is simple: the CF 675SR-R range covers everything you look at, and nothing you look past. That is normal for a platform this young.
Why gaps exist on a newer range?
On the CF 675SR-R, partly volume, partly tooling. A frame cover is a large, complex mould for a specific bike; if the platform is new and mostly sold in one region, the business case arrives later than it did for a superbike that has been in production for a decade.
We list what our supplier produces. When a part becomes available it appears in the collection; we do not pre-announce parts we cannot ship.
What this means in practice?
On the CF 675SR-R, build the front and the middle: chin, winglet, side panel, screen, tank cover. Change your position with the clamp. Add a solo tail with the cowl. Do not plan a full carbon build on this platform yet, because the structural covers do not exist in our range.
Anyone selling you a plan that includes them is selling a plan they cannot fill.

How do you spend sensibly here?
- chin and racing winglet — the cheapest real change.
- chin and shark fin panel — two large surfaces.
- tank cover, seat cowl or split screen — pick by area, not by price.
- clamp and clip-ons, the one part that changes how the bike fits you.
On the CF 675SR-R, two of those routes cost within of each other and change completely different areas. Decide which end of the bike you actually look at before comparing prices.
How do you confirm fitment for this part?
Everything is listed for the CFMOTO CF 675SR-R, the same platform as the US-market 675SS. All aftermarket, not official CFMOTO. Side panels are typically per side; confirm what a listing covers before ordering.
Where should you look next?
On the CF 675SR-R, if the part you want is not here, two options are honest: wait, or look at a platform where it exists. The ZX-10R has seventeen panels including frame and swingarm covers; the S1000RR has over forty parts. That is what a mature range looks like.
What are the common questions about range gap?
On the CF 675SR-R, these are the usual questions. Will tail panels be added? Can I use 450SR parts on a 675SR-R? What is the most complete build I can do today? Are these official CFMOTO parts? Does the 675SR-R range include a full fairing?
Will tail panels be added?
When they are available they will appear in the collection. We do not sell parts we cannot ship.
Can I use 450SR parts on a 675SR-R?
No. Different platforms, different mounting points.
What is the most complete build I can do today?
Chin, winglet, both side panels, split screen, tank cover, seat cowl and clamp: the whole front and middle, plus a solo tail.
Are these official CFMOTO parts?
No, all aftermarket.
Does the 675SR-R range include a full fairing?
No. There is no one-piece front fairing for this platform in our catalogue.
Browse: CFMOTO 675SR-R / 675SS parts. Same idea on a newer platform: the 703RR vs 820RR comparison.