Updated November 2026. Buys two parts on a 500RR, and the two sensible combinations answer different questions. One changes the rear; the other changes the rear and the front.

In short:
- Rear-focused: short tail plus seat cowl is.
- Ride plus rear: tall windshield plus short tail is.
- Both leave change, and neither needs another part to work.
What is the full range, for context?
| Part | Where to check the price |
|---|---|
| Short tail | See the product card |
| Tall windshield | See the product card |
| Seat cowl | See the product card |
| Tank cover | See the product card |
| Shark fin side panel | See the product card |
On the ZX-500RR, five parts, two price levels, and sits exactly between them. That is what makes this budget interesting on this platform: you can buy two cheap parts or none of the expensive ones. The full list is in the500RR parts guide.
How do you plan one: the rear,?
On the ZX-500RR, the short tail removes the overhang behind the seat; the seat cowl turns the pillion pad into a solo profile. Together they change the whole back of the bike for under. That is the highest visual change per dollar in this range, and the pair that makes the 500RR look like a different bike from behind.
The cost is the passenger seat, which the cowl covers. If you carry someone, plan two instead.

How do you plan two: ride plus rear,?
On the ZX-500RR, the tall windshield is the only part in this range that changes how the bike feels. Add the short tail and you have one functional change and one visual one, for the price of the pair above.
This is the plan we would recommend to anyone who rides at speed, because a screen is the only modification on this platform that you notice every single ride.
Which plan, honestly?
On the ZX-500RR, you commute or ride at speed: plan two. The screen earns its place every day. You ride solo and care how the bike looks: plan one. You carry a pillion: plan two, because plan one removes the seat.
What is the parts in both plans, linked?
On the ZX-500RR, short TailFixed or Foldable Seat CowlFour colours Tall WindshieldThree tints
What cannot buy?
On the ZX-500RR, the tank cover and the shark fin side panel are each, so the two largest surfaces in the range are out of reach. On this platform, is a rear-end and front-end budget, not a bodywork budget.
What if the budget is?
- Seat cowl: the biggest single visual change at the back.
- Tall windshield: the only functional change.
On the ZX-500RR, one part, one decision: looks or ride.

How do you install this part?
All listed for the ZXMOTO ZX-500RR. Aftermarket, not official ZXMOTO. Check the short tail variant before ordering; more than one version is listed — the fixed versus foldable guide covers it. Keep the pillion seat and hardware if you fit the cowl.
What are the common questions about budget?
On the ZX-500RR, these are the usual questions. Which plan is better value? Can I do both plans? Are they genuine ZXMOTO parts? What should you know about the tank cover?
Which plan is better value?
Plan two, if you ride at speed. A screen changes every ride; bodywork changes every photograph.
Can I do both plans?
That is and three parts: screen, short tail, seat cowl. It is the most coherent half-build in the range.
Are they genuine ZXMOTO parts?
No, aftermarket, as each listing states.
What should you know about the tank cover?
Buy it instead of two cheap parts if the bike's centre is what bothers you — the colour palette is on the product page.
Browse: ZXMOTO 500RR parts. Rear-end options: short tail versions.