Guides

Glossy white sportbike with a red 500 and black RR on the side fairing, gold fork, front three-quarter view.
bodywork

Fitting Winglets and Body Panels: Alignment Before Force

Panels do not crack because they are weak. They crack because they were tightened before...
続きを読む
Left side profile of a white-tank sportbike with black fairings, cyan rim stripes, and a silver swingarm.
bodywork

Why Panels Crack at Fastener Holes, and How to Prevent It

Why panels crack at fastener holes, the five causes in order of frequency, and the...
続きを読む
Right side profile of a white-and-black sportbike with cyan rim stripes, a silver swingarm, and a clear screen.
bodywork

Fasteners and Clips: What to Replace and What to Reuse

Which bodywork fasteners to reuse and which to replace — the white-clip rule, the spinning-bolt...
続きを読む
Left side profile of a gloss red sportbike with gold forks and a brushed muffler on dirt in front of sunflowers.
Bodywork

ZXMOTO 820RR Bodywork Removal Order

Short answer: the 820RR front fairing is one piece, so the front end comes off...
続きを読む
Left side profile of a white CFMOTO 675 with teal wheel rims and a black seat on pale paving beside lotus flowers.
Bodywork

CFMOTO 675SR-R Fairing Removal Order

On the CF 675SR-R, short answer: work from the bottom up. The lower chin fairing...
続きを読む
Left side profile of a silver-and-white CFMOTO SR with blue rim stripes and a brushed muffler among desert agave.
Bodywork

Top Triple Clamp Install: Torque, Sequence and Bar Angle

Short answer: a top triple clamp swap is a fork-clamping job, not a cosmetic one....
続きを読む
Front three-quarter of a gloss black 500RR with gold forks and a silver muffler on a gravel track through heather.
Bodywork

The Post-Install Re-Check: What to Look At 100 Miles Later

New panels almost never fail at the moment you fit them. They fail in the...
続きを読む
Left side profile of a silver-and-black CFMOTO 450SR with a large gray SR graphic, blue rim stripes, and gold forks.
Bodywork

DIY or Pay a Shop? What Bodywork Work Really Involves

On the CF 450SR, most bodywork jobs on a sportbike are a two-hour DIY task...
続きを読む
Left side profile of a blue-and-black Yamaha XMAX with a tall clear screen and black wheels before a stone quarry.
Bodywork

Yamaha XMAX 300 Panel Removal: The Right Order

On the Yamaha XMAX 300, scooter bodywork is built as a shell, not as a...
続きを読む
Left side of a red sportbike on a rocky lakeshore, with gold forks, black side vents, and a brushed muffler.
Bodywork

How Tight Should Motorcycle Fairing Bolts Be?

Most cracked fairing panels do not break in a crash. They crack at a bolt...
続きを読む
Lime green side fairings with a white ZX graphic and blue stripe, front three-quarter view on desert sand.
carbon fibre

ZX-10R Carbon Fairing Install: Order, Clips and What Breaks

On the Kawasaki ZX-10R, carbon panels do not fail because they are weak. They fail...
続きを読む
Left side profile of a glossy white sportbike with a black stepped seat, a red fairing stripe, and a silver muffler.
installation

How to Fit a Tank Cover: The Sequence

The fitting sequence every tank cover in the shop shares — clean, dry-fit, align the...
続きを読む
1 2 »