Updated November 2026. The main side fairing panel is the most expensive single side panel in the BMW S1000RR carbon range here:. Only the one-piece front fairing and the lower spoilers go higher. So before you order one, it is worth knowing exactly what this panel covers and what it does not, because the S1000RR side area is split across several parts that look similar in photos.

In short:
- , one panel, 2019–2024 S1000RR.
- It is the large mid-side surface between front bodywork and tail.
- It stacks with the upper cover and small panel — it does not replace them.
Where does the main side fairing panel sit?
On the BMW S1000RR, this is the large panel that forms the middle of the side profile: the surface between the front bodywork and the tail, running past the frame and radiator area.
It is the piece most people mean when they say the bike needs a new side panel after a low-side or a drop in a car park.
The listing is a single panel with one default variant. There is no finish choice and no left-right split shown as separate variants, so confirm which side you need and the quantity you need before checkout.
How it differs from the smaller side parts?
| Part | Where to check the price | What it covers |
|---|---|---|
| Main side fairing panel | See the product card | The large mid-side surface |
| Upper side panel cover | See the product card | The upper section above the main panel |
| Small side panel | See the product card | A small trim panel in the side assembly |
| Right small side panel | See the product card | One side only, for single-side damage |
On the BMW S1000RR, these are not interchangeable and they are not alternatives to each other. They stack. If your damage runs across a panel joint, you may need two of them, which is why it is worth mapping the damage on the bike before you order anything.
When should you buy this panel first?
- There is real damage in the middle of the flank. Cracks, road rash and missing sections in that area are this panel's territory.
- You are building a full carbon side. This is the anchor piece; the smaller panels align to its edges.
- You want the biggest visual change per panel. It is the largest uninterrupted surface on the side of the bike.
On the BMW S1000RR, if the damage is high on the flank near the tank, check the upper side panel cover first. If it is a small scuff near a joint, check whether the small side panel is the part that actually took the hit.
Buying the big panel for a small scuff is an expensive way to solve a small problem.
What should you check before ordering?
On the BMW S1000RR, photograph the damaged area straight on, then from above and below, with the bike on a stand. Note every panel joint around the damage, and whether the panel behind it is also marked. Confirm your model year. This panel is listed for the 2019-2024 S1000RR.
- The 2025 bike is a different generation.
- Confirm the bike is an S1000RR and not an M1000RR or an earlier generation with different bodywork.
- If the bike already has aftermarket panels, send photos before ordering. Mixed bodywork changes how a new panel seats.
How do you install the main side fairing panel?
On the BMW S1000RR, the main side panel carries a lot of edges: it meets the front bodywork, the tank area, the lower panels and often the seat unit. That means it should go on before the smaller pieces around it, and it should go on loosely.
- Support the bike securely and work on a cold engine.
- Remove the overlapping panels first so the main panel is not being slid out from under something.
- Keep fasteners sorted by position. Mixed lengths are the most common reinstall error on a panel this size.
- Dry-fit, check the gaps at both ends, then start every fastener by hand.
- Tighten evenly in a cross pattern and stop at snug. Use your service literature for torque values.
- Store the old panel flat if you plan to keep it. A warped spare is worth nothing.
Resist the urge to pull the panel into alignment with the fasteners. If the holes do not line up with the panel resting in place, something is trapped, the panel is the wrong version, or the bike has underlying damage that needs sorting first.

What should you know about budgeting the side of the bike?
On the BMW S1000RR, if you are pricing a full side, add the pieces before you commit to one. A main panel plus an upper side cover is before you touch the front or the tail.
Many riders are better served by replacing the damaged panel now and planning the rest of the side for a second order, so the bike stays usable and the budget stays honest.
If the front is also damaged, compare the separate S1000RR carbon front fairing with the One-piece front fairing. The one-piece is more money but fewer joints.
What are the common questions?
On the BMW S1000RR, these are the usual questions. Is this price for one panel or a pair? Can I fit just this panel and leave the rest standard? Does it fit a 2025 S1000RR? Will it cover existing scratches underneath? What is the 2023-style panel?
Is this price for one panel or a pair?
One panel. The listing carries a single default option, so order the quantity you need and confirm the side with us if the listing does not state it clearly.
Can I fit just this panel and leave the rest standard?
Yes. It will meet standard plastics at the joints. Expect a visible carbon-to-plastic edge, which some riders like and others do not.
Does it fit a 2025 S1000RR?
No. This panel is listed for 2019-2024 only.
Will it cover existing scratches underneath?
It covers the area it is designed to cover. It is not a repair panel and it will not hide damage on adjacent parts. Fix structural or mounting damage before fitting new carbon over it.
What is the 2023-style panel?
A same-price alternative with the later side profile, listed for 2019–2024 bikes. See the 2023-style panel guide before choosing a shape.
See the Main side fairing panel, the Upper side panel cover and the Small side panel, or browse the full BMW S1000RR carbon range.