Updated November 2026. For the only 450SR part you feel before you see it. The top clamp and clip-ons move your hands down and forward, which changes steering feel and wrist load at the same time.

In short:
- For the upper clamp and the clip-on bars together.
- Hands move down and forward; weight shifts over the front tyre.
- The most involved install in the 450SR range — fork support and torque figures are not optional.
What changes?
On the CF 450SR, your hands sit lower and further forward, so more of your weight goes over the front tyre and steering input gets shorter and more precise. The position stops being adjustable: there is no riser to slide, you set the bars once.
| Stock bars | With the kit | |
|---|---|---|
| Hand height | upright | lower |
| Reach | closer to the body | further forward |
| Weight bias | neutral | over the front tyre |
| Adjustable | yes, on the riser | no — set once |
What does it costs you?
On the CF 450SR, wrist load, mostly at low speed. In traffic you are upright with your hands taking weight they did not take before, which is why this is the wrong first purchase for a commuter.
It also changes the mirror and lever angles you have spent time setting, and it reduces leverage at the bar — a slow-speed U-turn takes more effort, not less.
Why the install matters more than the part?
On the CF 450SR, the upper clamp holds the fork tubes. Support the front so the forks cannot drop, loosen in stages, seat the clamp, set the bar angle, then torque to the figures in your manual. Those figures are load-bearing, so if you do not have them, this is a workshop job.
Check cable and hose routing at full lock before you ride. Bars that move down and forward change what the throttle and brake lines do, and a hose that is tight at full lock will eventually fail at the fitting.
What do it pairs with, and what to first?
In the CF 450SR range this is the only cockpit part, and it costs more than any other single part in the range. If your complaint is wind, the Racing windshield fixes that for half the money; if your complaint is the look, a Tank cover changes more of what you see.
Buy the clamp when the complaint is specifically the riding position — too upright, not enough weight on the front, steering that feels vague at speed.
Who should buy the clip-on conversion?
On the CF 450SR, riders who find the stock position too upright, and anyone using the bike on track or on fast roads for the steering precision. Not commuters, and not anyone whose first complaint is wind, which a screen solves for less.
What are the common questions about 450SR clip-on?
On the CF 450SR, these are the usual questions. Does the kit include the clip-on bars? Can I adjust the bar angle? Will it fit the 450SS? Do I need a workshop? Does it change the seat height?
Does the kit include the clip-on bars?
Yes — the listing is the top triple clamp and clip-on handlebars together.
Can I adjust the bar angle?
The bars can be set to an angle when fitting. There is no riser adjustment once they are on.
Will it fit the 450SS?
Yes. The 450SS is the US-market name for the same platform.
Do I need a workshop?
If you do not have the fork and clamp torque figures, yes. The clamp holds the fork tubes and there is no safe guess.
Does it change the seat height?
No. It changes hand position only.
Product page: 450SR Top Triple Clamp + Clip-Ons. Comparison: six parts ranked by what they change.