Updated November 2026. Seven parts, one platform, and a decision about where to start. The ZONTES 703RR catalogue is small enough to read in ten minutes, which is a good thing: you can see every option, price and colour before spending anything.
In short:
- Biggest visual change for the money: racing tank cover.
- Best ergonomic change: adjustable rearsets — only if your knees or clearance are the complaint.
- Cheapest front-end change: mirror block-offs or the lip spoiler at the same price.
What does the lower lip spoiler change?
On the ZONTES 703RR, injection-moulded plastic under the nose, in Gloss Black or Gray. It gives the front a lower, wider line. Cheapest way to change the bike in profile, and reversible.
What does the mirror block-off plates change?
On the ZONTES 703RR, plain aluminium-alloy plates close the mirror holes; the LED versions add concealed turn signals. One honest note: the LED brightness is described as comparable to a 10–21 W incandescent bulb, which is a brightness comparison, not power draw — and a concealed signal may not satisfy every inspection regime.
What does the tall windshield change?
On the ZONTES 703RR, black is opaque (you look over it), Smoke Gray is translucent (you keep a view). The tint is the whole decision, and it is a visibility decision rather than a styling one.
What does the brake or clutch lever guard change?
On the ZONTES 703RR, aluminium guard with bar end, in Black, Purple, Blue or Red. The sides are sold separately: the brake side is the one with a safety job, and it is not crash protection.
What does the racing tank cover change?
On the ZONTES 703RR, ABS cover over the stock tank in Gloss Black, Matte Black, White or Carbon Fibre Look. Biggest single visual change in the range, and it protects the original paint while fitted. The carbon-look version is a film on ABS, not carbon.
What does the adjustable rearsets change?
On the ZONTES 703RR, T6 aluminium, anodised, seven footpeg positions, four colourways. The only part here that changes how the bike fits you.
What does the upper triple clamp + clip-ons change?
On the ZONTES 703RR, cNC-machined T6 clamp with clip-on bars, Black or Silver. The most involved install in the range, because it holds the fork tubes and changes your riding position.
What is the seven parts, linked?
On the ZONTES 703RR, lower Lip Spoiler Mirror Block-Off PlatesLED versions Tall Windshield Brake & Clutch Lever GuardPer side Racing Tank Cover Adjustable Rearsets Upper Triple Clamp + Clip-Ons
What order to buy in?
On the ZONTES 703RR, start with the thing that annoys you. Wind noise → screen. Cramped legs → rearsets. Unfinished front → lip spoiler and mirror plates combined. Nothing annoys you and you just want a different bike → tank cover, because it changes the largest surface. The one order we would argue against is buying cosmetics first and ergonomics later.
A bike that fits you badly stays a bike that fits you badly, however good the panels look.
What should you know about fitment notes for the platform?
Every part is listed for the ZONTES 703RR specifically — not the 703R. All are aftermarket, not official ZONTES, and each listing states it. No listing publishes torque values. Use your manual where it gives one. Send model, year and a photo of the mounting area if unsure.
- Checking a fitment costs nothing; a return costs freight both ways.
| Dimension | Notes |
|---|---|
| Platform | ZONTES 703RR |
| Part | first upgrades |
| Install | No torque figures in this guide. Use the service manual and confirm the year on the product page. |
| Use | Street. |
| Shop | https://isleparts.com/products/zontes-703rr-lower-lip-spoiler |
What are the common questions about 703RR first upgrades?
On the ZONTES 703RR, these are the usual questions. What is the cheapest part that changes the look? Do I need to modify the bike? Are the coloured finishes paint or anodising? Will these fit a different ZONTES model?
What is the cheapest part that changes the look?
Mirror block-offs or the lip spoiler, both.
Do I need to modify the bike?
No listing calls for cutting or drilling. The clamp and clip-ons are the most involved fitment.
Are the coloured finishes paint or anodising?
Depends on the part: rearsets and clamp are anodised aluminium; tank cover and lip spoiler are plastic with a moulded or painted finish.
Will these fit a different ZONTES model?
No, each part is listed for the 703RR.
Browse: ZONTES 703RR collection. Deeper detail on any part: what exists and what does not.