Updated November 2026. The Yamaha XMAX 300 Handlebar Clamp comes in two versions, priced and. That gap separates two versions of the same listing: the mount on its own, and the mount supplied with clip-on handlebars as one set.

In short:
- = clamp mount only; = clamp + clip-on handlebars.
- Both in Black, Gray, Red or Gold at the same price within each version.
- The clamp is listed for the Yamaha XMAX.
What is the Two Versions and Their Prices?
| Version | Where to check the price | What arrives |
|---|---|---|
| Handlebar Clamp, mount only | See the product card | the clamp mount |
| Handlebar Clamp with clip-ons | See the product card | the mount plus clip-on handlebars, one set |
Our Yamaha XMAX 300 Handlebar Clamp listing covers both versions on one product page, so you can compare them side by side before you order rather than hunting through separate listings.
What does the Extra Buys?
On the Yamaha XMAX 300, the catalog prices the two versions exactly apart, and the difference is the hardware, not the finish. Both versions come in the same four finishes — Black, Gray, Red and Gold — so colour does not move the price.
If your bars are already the ones you want, the mount is the match; if you want the clip-on layout in a single order, the set is the one.
A useful way to think about the difference is value per ride. The cockpit is in your sightline every time you get on the bike, so a part that changes its character is one you interact with daily. If the handlebar area is the part of the XMAX 300 you care most about, the version is where the range tops out. If this is your first cockpit change, the version is the natural entry point.
Where does the Clamp Sits in the Cockpit?
On the Yamaha XMAX 300, the handlebar clamp is the center point of the cockpit — the part the bars and the surrounding trim are read against. Changing it changes the visual anchor of an area you see every time you sit on the scooter.
On an XMAX 300 the cockpit is on show at a standstill as much as it is in motion, so the center of that area carries more weight than it would on a fully faired bike where bodywork does the styling work.
It is also the only XMAX part in this guide's price band that touches the controls, which is why the fitting notes below matter more than they would on a cover.
How do you plan the Budget?
On the Yamaha XMAX 300, decide the total you want to spend on the handlebar area before you pick a version. If the clamp is the only change you are making, the version is a single purchase at the top of the range and the decision ends there.
If trim and other cockpit parts will follow, the version keeps the project moving and leaves budget for the rest.
For context in the wider line: the clamp is the second-most expensive XMAX part after thealuminium air filter cover, and it sits above the front windshield and the aluminium fuel cap.
How do you match the Rest of the Cockpit?
On the Yamaha XMAX 300, a clamp rarely stays alone for long. Once the handlebar area has a new center point, most riders start thinking about the trim around it. Our Yamaha XMAX 300 aluminum trim guide covers how those parts work together, and the handlebar clamp guide goes deeper on the clamp itself.
If you are planning the cockpit as a whole rather than part by part, browse the Yamaha XMAX parts collection first and decide which version of the clamp fits the overall plan, both in look and in budget.
How do you choose?
On the Yamaha XMAX 300, ask yourself three questions. First, what is your ceiling for this part: or? Second, how central is the cockpit to the rest of your build — is this the piece everything else has to match?
Third, do you plan to add more trim around the handlebar later, which would make the upper-tier version the anchor for the whole area?
How do you install the clamp?
On the Yamaha XMAX 300, work with the scooter on its centre stand and the front end unloaded. The clamp sits at the steering head area: if your procedure requires loosening controls or the bar assembly, follow the manual's sequence and torque figures. Check throttle and brake line sweep at full lock before the first ride.
- Aftermarket, not official Yamaha; confirm the model year on the listing.
What are the common questions?
Why is one clamp more? Does it need special tools to fit? Will it fit my Yamaha XMAX 300? Is the set street legal?
Why is one clamp more?
The version is the mount on its own. The version adds the clip-on handlebars, supplied with the mount as one set. Both come in the same four finishes, and within each version every colour costs the same.
Does it need special tools to fit?
Our listing does not specify tool requirements for either version. If you are not comfortable working around the handlebar area, follow the product page guidance or have the clamp fitted professionally.
Will it fit my Yamaha XMAX 300?
The clamp is listed for the Yamaha XMAX 300. Confirm the fitment details on the product page before ordering, especially if your scooter has been modified.
Is the set street legal?
Changing bar layout does not change lighting or mirrors by itself, but re-check mirror and lever positions after fitting — and local rules on bar width if your cockpit changes shape noticeably.
Compare both versions on the Yamaha XMAX 300 Handlebar Clamp product page, or browse the Yamaha XMAX 300 parts range to plan the rest of the cockpit.