Updated November 2026. For an air filter cover is the highest price in the XMAX range, and the part most likely to be bought for the wrong reason. Here is what it is, what it costs, and who should actually spend it.

In short:
- Aluminium, replaces the plastic cover over the air filter housing.
- Visible from the side, on a scooter where most surfaces are flat panels.
- It does not change engine performance. It changes the finish of a functional area.
What does it cover?
On the Yamaha XMAX 300, the air filter housing sits low on one side of the scooter. Its cover is usually plain plastic; an aluminium replacement turns a functional panel into a visible machined surface. On an XMAX, that area is one of the few places where a metal part can be seen without adding something on.
That is the whole appeal, and it is a real one: scooters are largely plastic, and metal stands out against plastic.
Why it costs?
On the Yamaha XMAX 300, machined aluminium is expensive relative to moulded plastic: material cost, machining time, and a much lower production volume than a standard cover. It is the same reason aluminium trim costs more than painted trim on any vehicle.

Price here reflects process, not how much of the scooter it covers. It is the smallest high-price part in the catalogue, and that is worth understanding before ordering.
Where does it sit against the rest of the range?
| Part | Where to check the price |
|---|---|
| Front windshield | See the product card |
| Tail light cover | See the product card |
| Aluminum fuel cap | See the product card |
| Side stand | See the product card |
| Rear grab handle | See the product card |
| Handlebar clamp | See the product card |
| Air filter cover | See the product card |
On the Yamaha XMAX 300, use the product cards for current figures. This section keeps the choice, not a copied price.
Who should buy this part?
On the Yamaha XMAX 300, owners building an aluminium look: yes, it is the anchor piece. Replacing a damaged cover: only if the original is beyond saving; plastic is cheaper. Expecting performance: no. It is a cover.
What does it pair with?
On the Yamaha XMAX 300, the aluminium fuel cap and the rear grab handle make the same statement on the same scooter. Together with the air filter cover they are of aluminium across three areas. If that sounds like a lot for a scooter, it is.
That is the honest way to describe a premium cosmetic part: it is for the owner who has decided the finish matters, not for the owner looking for value.
How do you install this part?
Listed for the Yamaha XMAX 300; confirm the model year. Aftermarket, not official Yamaha. Bolt-on over the existing housing; reuse the original fasteners where listed. Check clearance to the bodywork after fitting; a machined cover sits closer than moulded plastic.
How do you care for this part?
On the Yamaha XMAX 300, aluminium with a finish wants mild soap and a soft cloth. Avoid abrasive polish on machined surfaces, because it rounds the edges that make the part look machined in the first place.

If the finish is anodised rather than painted, a scuff cannot be touched up. That is worth knowing before it lives next to a boot.
What are the common questions about air filter cover?
On the Yamaha XMAX 300, these are the usual questions. Does it change airflow? Does it corrode? Is it visible? Are they genuine Yamaha parts? Is it worth?
Does it change airflow?
No. It is a cover over the housing, not a filter or an intake.
Does it corrode?
Aluminium with a finish; keep it clean and avoid abrasive polish.
Is it visible?
Yes, from the side, low down.
Are they genuine Yamaha parts?
No, aftermarket, as the listing states.
Is it worth?
Only if the aluminium look is the goal. For function, the original cover does the same job.
Product page: Yamaha XMAX 300 Aluminum Air Filter Cover. Cheaper entry points: Four parts.