Updated November 2026. Most first mods are bought in the wrong order. Not because people choose bad parts, but because they buy the part that photographs well before the part that fixes something — then run out of budget and live with the problem.

In short:
- Decide what annoys you before opening a product page.
- Buy the part that fixes that complaint, ride two weeks, then decorate.
- Buy in batches, not hauls. One wrong part is a return; six wrong parts is a storage problem.
What does the step 1 change?
Before you look at a single listing, answer one question: what does this bike do that you dislike? Wind noise at mph? Legs folded too tight? A rear end that looks unfinished? A screen you cannot see through at night?
Every part you buy should answer that question. If it does not, it is decoration — fine, but it should be your second purchase, not your first.
What does the step 2 change?
Wind: a screen. Taller profile; tint chosen by whether your sightline crosses the top edge. Legs and ground clearance: rearsets. Adjustable ones first, because you do not yet know which position you want. Wrist and shoulder load: clip-ons and a triple clamp — the most involved install on this list.
- Rear that looks unfinished: seat cowl or tail panel, depending on whether you have a pillion seat you never use.

What does each complaint cost?
| Complaint | Part | Where to check the price |
|---|---|---|
| Wind pressure or noise | 450SR Racing Modified Windshield | See the product card |
| Legs too tight | 703RR Adjustable Rearsets | See the product card |
| Wrist load | 450SR Top Triple Clamp + Clip-Ons | See the product card |
| Unfinished rear | 675SR-R Seat Cowl | See the product card |
| Nothing specific — just looks | 450SR Half-Wrap Tank Cover | See the product card |
Prices are current listed prices for the parts we stock. Where the cheapest fixing part sits above your budget, the honest answer is to wait a month rather than buy a cheaper part that does not solve the problem.
What does the step 3 change?
This is the step people skip. A part that looked right in a listing can feel wrong on your bike — a screen that moves the noise rather than removing it, rearsets one position too far. Two weeks tells you more than any review, and it stops you stacking a second purchase on a decision you have not tested.
What does the step 4 change?
Pick a direction — dark, colour-matched or carbon-style — and buy only parts that serve it. The tell of a build that went wrong is usually the front end: a gloss screen, a matte tank cover and a carbon-look side panel on the same machine.
Two finishes per bike is a workable rule. Three is a decision you will want to undo, and aftermarket panels are not cheap to undo.
What does the step 5 change?
Buying every panel at once is the most common expensive mistake. You cannot judge a change you made in one afternoon, and if the fit is wrong you are returning a box instead of a part. Two parts a season is faster than it sounds.

What should you check before any order?
Model and year — from the registration and VIN, not memory. The marketplace name. Several bikes here are sold under two names in different markets; both are the same platform, but the listing has to match yours. Whether the part is aftermarket. Everything we sell is, and every listing says so.
- Do not expect OEM finish; expect a part made to fit an OEM shape.
- What is in the box. A seat cowl is not a seat. A lever guard is one side. A tank cover is not a tank.
Where should you start, by complaint?
Wind: 450SR Racing Windshield or the 703RR Tall Windshield Legs: 703RR Adjustable RearsetsSeven positions Unfinished rear: 675SR-R Seat Cowl Largest surface: 450SR Half-Wrap Tank Cover
What are the common questions about beginner?
What should I buy first on a brand-new bike? Is cheaper always worse? Can I fit these myself? Are mods hard to reverse? How much should I spend on a first order? What if my complaint is not addressed by any part you sell?
What should I buy first on a brand-new bike?
Nothing, for the first month. Ride it, find the actual complaint, then buy.
Is cheaper always worse?
No, but cheap plastic and cheap carbon behave differently. Buy the material the part actually needs.
Can I fit these myself?
Panels, screens and covers: yes, with hand tools. Clamps, clip-ons and anything holding the fork: workshop, or the manual's torque figures.
Are mods hard to reverse?
Bodywork is not. Keep the stock parts and keep the fasteners with them.
How much should I spend on a first order?
300 is enough for a real change. Below that you are buying one small part, which is fine but rarely satisfying.
What if my complaint is not addressed by any part you sell?
Then do not buy a substitute. We stock bodywork, screens, cockpit parts and trim — not suspension, exhaust or engine parts, and no cosmetic part fixes those.
Start with a platform: 450SR, 675SR-R, ZXMOTO 500RR, ZONTES 703RR, ZX-10R, S1000RR. Budget help: Across five bikes.