Updated November 2026. Most fitment problems we see are not manufacturing faults. They are naming problems. The same part is sold under two model names, a panel was revised inside one generation, or a rider ordered the outer cover when the cracked piece was the inner panel. On CFMOTO and ZXMOTO bodywork, three checks catch almost all of it before you pay for shipping.
This is the routine we use against our own listings in the CFMOTO 450SR and 450SS parts range, the 675SR-R and 675SS, the ZXMOTO 500RR and the ZXMOTO 820RR. It takes about five minutes and needs your registration document plus one clear photo of the damaged panel.
Why fitment checks matter more than part quality?
Aftermarket bodywork is moulded from an original part, so the shape is rarely the issue. What does fail is the match between what you ordered and what is bolted to your bike. Four things cause that mismatch:
- Two names for one bike. CFMOTO sells the 450SR as the 450SS in the US market, and the 675SR-R as the 675SS. A part listed for one name is often the same part.
- Year revisions. Bodywork changes between model years far more often than engines do.
- Panel naming. A "side panel", an "upper side panel cover" and a "small side panel" are three different pieces on the same fairing.
- Assumed hardware. Clips, grommets and bolts are usually not included with a painted panel.
CFMOTO 450SR V3 Front Windshield
V3 front windshield for the CFMOTO 450SR. Listed in 15 available styles options.
From $239.00
How do you check 1: use the market name on your own bike?
Start with the model name printed on your registration or the sticker on the frame, not the name in the search bar. Our 450SR V3 front windshield listing states it plainly: it is designed for the CFMOTO 450SR and 450SR-S, and the US-market version of that bike is sold as the 450SS.
The 675SR-R listings carry the same note about the 675SS.
What this means in practice: if you ride a 450SS, a part listed for the 450SR is normally the correct part, but you should still confirm the year and the bodywork variant before ordering. If your paperwork says 450SR-S, treat that as its own line item and check it separately.
How do you check 2: identify the panel, not the bike?
Fairings are assemblies. On the 675SR-R, for example, there is a main side panel, a shark fin side panel and a separate race-style winglet that mounts at the panel edge. They are listed as three products with three prices because they are three parts.
Take a photo of the damaged piece from two angles and compare the outline, the mounting tabs and the number of fixing points against the product gallery. If your crack sits on a small cover that sits on top of a larger panel, you probably need the cover, not the panel.
Side panel for the CFMOTO 675SR-R. Listed in Gloss Black, Matte Black, Gray and White.
$219.00
How do you check 3: compare the hole pattern before mounting?
Screens and bolt-on covers live or die by hole spacing. Our ZXMOTO 820RR windshield listing asks buyers to compare the hole pattern with the stock screen before mounting, and it names the exact scope: 2026 ZXMOTO 820RR, not the 820R naked, with 820RR-R not confirmed.
That single sentence prevents most wrong orders on that part.
The same logic applies to winglets and chin fairings. A winglet for the 675SR-R mounts at the side-panel edge; a chin fairing replaces the lower lip of the nose. Neither part requires cutting or drilling according to the listings, which is exactly why the mounting points have to match out of the box.
Windshield for the ZXMOTO 820RR. Listed in Black and Gray; Ridged or Rounded.
$199.00
What does the numbers look like on real listings?
- CFMOTO 450SR V3 front windshield: twelve live colour and tint combinations.
- CFMOTO 675SR-R side panel: four colours.
- CFMOTO 675SR-R lower chin fairing: matte black only.
- ZXMOTO 500RR short tail: fixed or foldable.
- ZXMOTO 820RR windshield: black or gray, ridged or rounded.
Prices and finish lists change, so treat these as a snapshot of the live catalogue rather than a permanent reference. The colour name on the product page is the colour you will receive; "carbon fiber hydro dip" is a dipped finish, not a carbon layup.
CFMOTO 675SR-R Lower Chin Fairing
Lower chin fairing for the CFMOTO 675SR-R. Listed in Matte Black.
$69.00
Short tail for the ZXMOTO 500RR. Listed in Fixed or Foldable.
$99.00
When a part does not fit, send us these five things?
Fitment questions get resolved in one reply when the first message includes the order number, the model name from your registration, the model year, two photos of the mounting area and a photo of the part you received. With those, we can usually tell within a message whether you have the wrong panel or a genuine defect.
What is the short answer?
Confirm the market name, identify the exact panel, compare the hole pattern, and keep the packaging until the part is mounted. That sequence resolves nearly every fitment question we receive, and it is faster than returning a panel that was never going to fit.
| Dimension | Notes |
|---|---|
| Platform | ZXMOTO 820RR, ZX-500RR, CF 675SR-R, CF 450SR. A part for one of these bikes does not fit the others. |
| Part | CFMOTO and ZXMOTO |
| Install | Bolt-on where the listing says the stock points are reused. This guide does not add a torque sheet. |
| Use | Street. |
| Shop | https://isleparts.com/products/cfmoto-450sr-v3-front-windshield |
What are the common questions?
Does a part listed for the 450SR fit my 450SS? Are these CFMOTO or ZXMOTO original parts? Do I need new clips or bolts? Can I use 820RR parts on the 820R?
Does a part listed for the 450SR fit my 450SS?
In most cases yes, because the 450SS is the US-market name for the same platform. Confirm the model year and the specific panel before ordering, since bodywork can differ within a generation.
Are these CFMOTO or ZXMOTO original parts?
No. Unless a listing explicitly says OEM or OEM-spec, the parts are aftermarket accessories made to fit the original mounting points. Our listings state this on the product page.
Do I need new clips or bolts?
Plan for it. Painted panels normally arrive without fasteners, and reusing old clips on new bodywork is the most common cause of a loose panel after installation.
Can I use 820RR parts on the 820R?
The 820RR windshield listing explicitly excludes the 820R naked. Check each product's fitment line rather than assuming the RR and R share front bodywork.
What should you know about products used as examples in this guide?
CFMOTO 450SR V3 Front Windshield — 12 colour and tint combinations. CFMOTO 675SR-R Side Panel — gloss black, matte black, gray or white. ZXMOTO 820RR Windshield — polycarbonate, black or gray, ridged or rounded.




