Updated November 2026. Short answer: the CFMOTO 450SR V3 Front Windshield is not just a screen. It is a two-part product: a body-colour trim panel plus a tinted screen, sold as 15 combinations across five body colours and three tints. It is listed as fitting the CFMOTO 450SR and the 450SR-S, and the screen is acrylic rather than polycarbonate — impact-resistant and UV-protected, but a material that asks for careful cleaning.
- Price: the same for most combinations; the Matte Black + Black variant is listed lower.
- Body colours: Starlight White, Matte Black, Zircon Silver, Mist Silver, Space Gray.
- Tints: Clear, Smoke, Black — three per body colour.
- Fitment: CFMOTO 450SR and 450SR-S; the US-market 450SS shares the platform.
CFMOTO 450SR V3 Front Windshield
V3 front windshield for the CFMOTO 450SR. Listed in 15 available styles options.
From $239.00
What is the V3 screen actually?
On the CF 450SR, most aftermarket screens are a single moulded sheet that bolts to the stock mounts. The V3 is different: it pairs the screen with a colour-matched trim that sits between the screen and the nose. That is why the listing is organised by body colour first and tint second, rather than by tint alone.
The practical effect is that the V3 changes the look of the front end, not just the airflow. On a white bike, Starlight White with a Clear screen reads close to stock; the same screen with a Black tint reads as a much more aggressive nose without touching paint. On a black bike, Matte Black with Smoke is the combination that disappears into the bodywork.
What should you know about five body colours, three tints, fifteen combinations?
On the CF 450SR, the five body colours are Starlight White, Matte Black, Zircon Silver, Mist Silver and Space Gray. Each is offered with Clear, Smoke or Black, which is where the fifteen variants come from. Two things are worth knowing before you pick:
- Gloss and matte do not mix. Starlight White, Zircon Silver, Mist Silver and Space Gray are the lighter, brighter finishes; Matte Black is the only matte option. Pairing a matte trim with a gloss tank or fairing shows at the seam.
- One combination is cheaper. Matte Black + Black is listed below the other combinations, so if that suits your bike it is the value pick.
How do you choose between V3 and racing Modified: the real difference?
On the CF 450SR, ISLEPARTS also sells a Racing Modified Windshield. It is a single screen in three colours — Clear, Smoke Gray and Black — with no body-colour trim. The difference is not quality; it is what you are buying.
Choose the Racing Modified if you want a plain screen at the lowest price and your bike already has the trim you like. Choose the V3 if the trim itself is part of the look, or if the original trim is scuffed and you would rather replace screen and trim together. If you are weighing the two shapes against each other, the V3 vs Racing screen guide compares them directly.
What should you know about height, eye line and buffeting?
On the CF 450SR, a taller or differently shaped screen changes where the airflow hits you, and that is personal.
The useful measurement is not the screen height on its own but where the top edge sits relative to your eye line when you are in your normal riding position: below the eye line, you look over the screen and get clean air to the helmet; above it, you look through the screen and the quality of the tint starts to matter much more.
That is the argument for a Clear screen if you sit tall or ride with the screen close to eye level, and for Smoke or Black if you look well over it. A dark tint you have to look through at night is a compromise no shape can fix.
How do you fit notes for the 450SR and 450SR-S?
The listing states a precision fit for the CF 450SR and 450SR-S; the US-market model is the 450SS, so if that is what is on your registration, confirm the model year and bodywork before ordering. The screen mounts on the stock points, so the job is a bolt-on — but there are two habits worth keeping:
- Loosen, do not lever. Fit all fasteners finger-tight first, let the trim settle into the nose, then tighten in a cross pattern. Acrylic cracks at a bolt hole far more easily than at the middle of the screen.
- Do not overtighten the trim. The trim is the part that sets the gap to the fairing; pulling one corner tight first shifts the gap to the opposite side.
What does the care change?
On the CF 450SR, acrylic is impact-resistant and UV-protected, but it is not solvent-resistant. Petrol, brake cleaner, acetone and ammonia-based glass cleaners will cloud it.
Wash with water and a pH-neutral car shampoo, rinse with plenty of water before wiping, and use a clean microfibre cloth — grit trapped in a sponge is what leaves the fine scratches that show up at night.
For light marks, a plastic polish made for acrylic screens is the right product. Avoid paper towels and dry wiping of dust.
Which listed parts does this guide cover?
- CFMOTO 450SR V3 Front Windshield — five body colours × three tints.
- CFMOTO 450SR Racing Modified Windshield — Clear, Smoke Gray, Black.
On the CF 450SR, colours and fitment notes were checked against the live ISLEPARTS product pages on 4 November 2026; card prices come from those pages. The rest of the range is in the CFMOTO 450SR / 450SS Parts collection.
CFMOTO 450SR Racing Modified Windshield
Racing modified windshield for the CFMOTO 450SR. Listed in Clear, Smoke Gray and Black.
$199.00
| Dimension | Notes |
|---|---|
| Platform | CF 450SR |
| Part | CFMOTO V3 front windshield |
| Install | Bolt-on where the listing says the stock points are reused. This guide does not add a torque sheet. |
| Use | Street. |
| Shop | https://isleparts.com/products/cfmoto-450sr-v3-front-windshield |
What are the common questions?
On the CF 450SR, these are the usual questions. Does the V3 fit the 450SS? Is the screen polycarbonate or acrylic? Can I buy the trim separately? Will a dark tint pass inspection?
Does the V3 fit the 450SS?
The listing states the 450SR and 450SR-S; the 450SS is the US-market version of the same platform. Confirm model year and bodywork with the store before ordering.
Is the screen polycarbonate or acrylic?
Acrylic: the listing describes it as high-strength acrylic, impact-resistant and UV-protected. Polycarbonate is a different material used on some other models, so do not assume the two behave the same when cleaning.
Can I buy the trim separately?
The product is sold as a trim and screen combination, not as two separate parts. If only the screen is damaged, the Racing Modified screen is the cheaper route.
Will a dark tint pass inspection?
That depends on your state. Some states restrict tint on screens you look through rather than over; check your local rules before choosing Black.

