Updated November 2026. The CFMOTO 450SR Concept Winglet is and comes in six finishes: Red, Blue or White, each in a Diagonal or a Forged pattern. Which one you pick changes the look of the front more than the winglet shape does, because the pattern is what you see at close range.

In short:
- Six finishes, one price: Red, Blue or White in Diagonal or Forged, all.
- The pattern matters more than the colour at close range.
- The V4 winglet is a different shape, not a premium finish of this one.
This guide covers how the two patterns differ, which colours suit which bikes, and how the Concept compares with the V4 winglet.
What should you know about six finishes, one price?
| Colour | Diagonal | Forged |
|---|---|---|
| Red | See the product card | See the product card |
| Blue | See the product card | See the product card |
| White | See the product card | See the product card |
On the CF 450SR, there is no price difference between the patterns. The choice is purely what the surface looks like.
How do you choose between diagonal and forged?
On the CF 450SR, the names describe the finish pattern rather than a colour. A Diagonal finish presents a visible directional weave; a Forged finish presents a forged-carbon style, mottled surface. Stand three metres away and they read as different textures; stand next to the bike and the difference is obvious.
- Diagonal reads as traditional composite. It suits a bike with other visible weave on it — a tank cover, a side panel or a screen surround.
- Forged reads as modern and a little quieter. It hides small marks better than a directional weave, because there is no repeating pattern to break.
If you already have carbon on the bike, match the pattern family rather than the colour. Two different weaves in the same colour look more mismatched than two different colours in the same weave.
How do you choose a colour?
- Red is the loudest and pairs with the red accents on the 450SR's bodywork and details.
- Blue is the subtler option and works well against darker bodywork where red would shout.
- White shows the winglet shape most clearly and is the best choice if you want the aero detail to be visible without adding a strong colour.
On the CF 450SR, think about the bike as it will look in a year, not just today. If a tank cover or screen change is planned, pick the winglet finish after that decision, not before.
Concept or V4?
On the CF 450SR, these are two different winglet designs for the same bike, not two finishes of one part. The Concept is in six finishes. TheCFMOTO 450SR V4 Winglet is a different shape in Starlight Black, Matte Black, Starlight White or Silver.

| Concept Winglet | V4 Winglet | |
|---|---|---|
| Price | See the product card | See the product card |
| Finishes | 6 — 3 colours × 2 patterns | 4 solid colours |
| Read | graphic, pattern-led | factory-adjacent, shape-led |
| Best for | a distinctive front detail | a clean factory-plus look |
The gap buys a different aero shape and a different colour palette. Neither is a performance claim: on the road, the visible difference is the shape at the side-panel edge. Our guide to the450SR winglets covers the two designs side by side.
How do you install the concept winglet?
On the CF 450SR, winglets are small parts with a small margin for error, because a misaligned winglet is visible from every angle.
- Fit them with the side panels already in place, since the winglet edge follows the panel line.
- Dry-fit both sides before fastening either. Left and right should mirror each other; if one sits differently, check for a trapped clip.
- Do not over-tighten. These panels are thin at the mounting points and a crushed hole is permanent.
- Use your service literature for torque values; otherwise snug and recheck after the first ride.
- Wipe the mounting area clean before fitting. Grit trapped behind a winglet will rub through the paint on the panel underneath.
How do you care for the concept winglet?
On the CF 450SR, coloured finishes on small panels take more abuse than the rest of the bodywork because they face road spray and, on track days, tyre debris. Wash them with the rest of the bike, avoid abrasive polish, and check the fasteners after any long ride.
A loose winglet at speed is noisy, and the vibration damages the mounting holes.
What should you know about shop the 450SR winglets?
See the CFMOTO CF 450SR Concept Winglet and the V4 Winglet, or browse the full CFMOTO 450SR / 450SS parts range.
What are the common questions?
On the CF 450SR, these are the usual questions. Is the price the same for all six finishes? What does Forged mean here? Can I mix Diagonal and Forged on the same bike? Does the winglet fit the 450SS as well? Does it fit the 675SR-R?
Is the price the same for all six finishes?
Yes. Every Concept Winglet variant is.
What does Forged mean here?
It describes the finish pattern: a forged-carbon style surface rather than a directional diagonal weave.
Can I mix Diagonal and Forged on the same bike?
You can, but it will look like two different purchases. Matching the pattern family reads as one build.
Does the winglet fit the 450SS as well?
The 450SR and the US-market 450SS share this bodywork according to our listings for the platform. Confirm your model and year before ordering.
Does it fit the 675SR-R?
No. The 675SR-R has its own winglets and. Nothing crosses platforms.